Manifest Destiny

McAfee Security

PRODUCTIVITY

Trackers

Permissions

Total permissions: 76
Unknown permissions: 25
Signature permissions: 15
Permissions considered normal: 25
Permissions considered dangerous: 11
Allows an app to access approximate location. Alternatively, you might want ACCESS_FINE_LOCATION.
No description yet, this could be a misspelling or a permission created by the app itself
Allows an app to access precise location. Alternatively, you might want ACCESS_COARSE_LOCATION.
Allows applications to access information about networks.
Allows applications to access information about Wi-Fi networks.
Allows the app to answer an incoming phone call.
(signature privileged development)
Allows an application to collect battery statistics
Must be required by device administration receiver, to ensure that only the system can interact with it.
Allows applications to connect to paired bluetooth devices.
Allows applications to discover and pair bluetooth devices.
Allows an application to initiate a phone call without going through the Dialer user interface for the user to confirm the call.
costsMoney
(dangerous instant)
Required to be able to access the camera device. This will automatically enforce the '> uses-featureall camera features. If you do not require all camera features or can properly operate if a camera is not available, then you must modify your manifest as appropriate in order to install on devices that don't support all camera features.
Allows an application to change whether an application component (other than its own) is enabled or not. Not for use by third-party applications.
Allows applications to change network connectivity state.
Allows applications to enter Wi-Fi Multicast mode.
Allows applications to change Wi-Fi connectivity state.
Allows an application to delete packages. Not for use by third-party applications. Starting in N, user confirmation is requested when the application deleting the package is not the same application that installed the package.
Allows applications to disable the keyguard if it is not secure.
Allows access to the list of accounts in the Accounts Service. Note: Beginning with Android 6.0 (API level 23), if an app shares the signature of the authenticator that manages an account, it does not need 'GET_ACCOUNTS' permission to read information about that account. On Android 5.1 and lower, all apps need 'GET_ACCOUNTS' permission to read information about any account.
(signature privileged development)
Allows an application to collect application operation statistics. Not for use by third party apps.
Allows an application to find out the space used by any package.
No longer enforced.
Allows applications to open network sockets.
Allows an application to call killBackgroundProcesses.
(signature privileged role)
Allows modification of the telephony state - power on, mmi, etc. Does not include placing calls. Not for use by third-party applications.
Allows formatting file systems for removable storage. Not for use by third-party applications.
Allows mounting and unmounting file systems for removable storage. Not for use by third-party applications.
(signature privileged development appop retailDemo)
Allows an application to collect component usage statistics Declaring the permission implies intention to use the API and the user of the device can grant permission through the Settings application.
No description yet, this could be a misspelling or a permission created by the app itself
Allows an application to read the user's contacts data.
Allows an application to read from external storage. Any app that declares the WRITE_EXTERNAL_STORAGE permission is implicitly granted this permission. This permission is enforced starting in API level 19. Before API level 19, this permission is not enforced and all apps still have access to read from external storage. You can test your app with the permission enforced by enabling
softRestricted immutablyRestricted
(signature privileged development)
Allows an application to read the low-level system log files. Not for use by third-party applications, because Log entries can contain the user's private information.
Allows read only access to phone state, including the current cellular network information, the status of any ongoing calls, and a list of any android.telecom.PhoneAccount registered on the device. Note: If both your ' minSdkVersion and ' targetSdkVersion values are set to 3 or lower, the system implicitly grants your app this permission. If you don't need this permission, be sure your ' targetSdkVersion is 4 or higher.
Allows applications to read the sync settings.
Allows applications to read the sync stats.
New version of GET_TASKS that apps can request, since GET_TASKS doesn't really give access to task information. We need this new one because there are many existing apps that use add libraries and such that have validation code to ensure the app has requested the GET_TASKS permission by seeing if it has been granted the permission... if it hasn't, it kills the app with a message about being upset. So we need to have it continue to look like the app is getting that permission, even though it will never be checked, and new privileged apps can now request this one for real access.
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting. If you don't request this permission, you will not receive the broadcast at that time. Though holding this permission does not have any security implications, it can have a negative impact on the user experience by increasing the amount of time it takes the system to start and allowing applications to have themselves running without the user being aware of them. As such, you must explicitly declare your use of this facility to make that visible to the user.
Allows an application to change the Z-order of tasks.
Permission an application must hold in order to use ACTION_REQUEST_IGNORE_BATTERY_OPTIMIZATIONS.
The restartPackage API is no longer supported.
(signature setup appop installer pre23 development)
Allows an app to create windows using the type TYPE_APPLICATION_OVERLAY, shown on top of all other apps. Very few apps should use this permission; these windows are intended for system-level interaction with the user. Note: If the app targets API level 23 or higher, the app user must explicitly grant this permission to the app through a permission management screen. The app requests the user's approval by sending an intent with action ACTION_MANAGE_OVERLAY_PERMISSION. The app can check whether it has this authorization by calling android.provider.Settings#canDrawOverlays Settings.canDrawOverlays()
(signature privileged installer role)
Allows an application to update application operation statistics. Not for use by third party apps.
We need to keep this around for backwards compatibility
removed
Allows an app to use fingerprint hardware.
Allows access to the vibrator.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows an application to write the user's contacts data.
Allows an application to write to external storage. Note: If both your ' minSdkVersion and ' targetSdkVersion values are set to 3 or lower, the system implicitly grants your app this permission. If you don't need this permission, be sure your '>getExternalFilesDir and getExternalCacheDir. If this permission is not allowlisted for an app that targets an API level before Q this permission cannot be granted to apps.
softRestricted immutablyRestricted
(signature privileged development)
Allows an application to read or write the secure system settings. Not for use by third-party applications.
(signature preinstalled appop pre23)
Allows an application to read or write the system settings. Note: If the app targets API level 23 or higher, the app user must explicitly grant this permission to the app through a permission management screen. The app requests the user's approval by sending an intent with action ACTION_MANAGE_WRITE_SETTINGS. The app can check whether it has this authorization by calling android.provider.Settings.System#canWrite Settings.System.canWrite()
Allows applications to write the sync settings.
We need to keep this around for backwards compatibility
removed
We need to keep this around for backwards compatibility
removed
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
No description yet, this could be a misspelling or a permission created by the app itself
PRODUCTIVITY 0

Map of past connections